www.drip fed waste oil heating.com
We ship all our products world wide, accept 45 kg cylinders. 
We sell controlled, safe, clean burning waste oil heaters.
2020 All Rights Reserved. Website updated 22/05/2021    12.00 p
Note the shop is in USD & NZD $'s go to currency converter to find  the price in your currency

 drip fed waste oil heating.com 
Althought drip fed waste oil heating is still our name we are far from than that with fan forced airflow 
with electronics to control the heater.
2019 . All Rights Reserved. Current updated 10/10/2019 10.09am


                                          We build copper coils, pretty much any side diameter, from 100mm to 540mm.


These copper coils can be made to fit your requirements. Price will vary depending on lenght and if extra copper piping is used. 

Copper is not cheap. if i went into a plumbing business and asked for a 15 metre coil x 12.7 mm the over the counter price is $280.00 We get these cheaper because we buy alot of copper pancakes from them. 

Every coil is pressure tested for leaks prior to shipping. 

We only use plumbers Sil-fos as the joining solder, which requires the copper to be red hot before the sil-fos will melt. The copper is very close to melting point 1200c before the sil-foss melts on the join.

Excellent for inside any fire. The silver sil-fos will never melt as the water flowing through the tubing will only at the max get to 140c.

Currently we use one 15 metre  coil to heat our home, the coil is 12 years old and has never looked like faulting.

The sizes available in copper coils are 115mm, 140mm, 150mm, 170mm, 250mm this is the inside measurement.

Add 25.4mm for the external measurement.

Should you want a coil for your project the contact us [email protected]

The latest tube coiler with assorted dies.

The pressure testing apparatus which pumps water into the coil and holds it there pressurized until released.

This is a 7.5 metre coil built to fit over the 150mm flue to capture and wasted heat  and turn  it into hotwater going out the flue.

Contact us via email should you want one. [email protected]

Buy Now $189.00 NZD. plus courier.

or $115.24 USD

Copper Coils Wetback, Made to order.

This is 15 metres of 12.7mm Refrigerating tubing. This coil is 280mm Diameter x 480mm high.

Priced at $230.00 usd or  $349.00 nzd. Plus courier.

These have been built to fit inside the 18kg & 45kg heaters.


  Double copper coil 30 metres joint to 25mm manifold.
Buy Now $649.00 NZD plus courier

From 2 single coils intertwined to double copper coils and another 150mm coil inserted down the centre. 47 metres but copper lengths running down the centre.

Buy Now $979.00 NZD plus courier.

Copper coils, let us know what you want and we'll do our best to make it to the size you want.

The above coil stretched out, ready to be installed in a 45 kg cylinder, the idea is each coil gets hot from the heat, rather than installing the above coil, where each coil shelters from the next. 12.7mm diameter x 15 metres.

$330.00 NZD.

12.7mm x 30 metres copper coil with double manifold to 25mm outlet and inlet with fittings.

This is going to be used to heat a 40,000 litre swimming pool.

$649.00 NZD.

Unfinished however this is 30 metre coil with a 125mm coil inside a 155mm coil.

The inlet and outlets are exiting out one end.

Can be made 650mm long this customer wanted it 800mm long plus the 25mm copper and fittings. Priced at $689.00 Nzd.

This is going inside a barrel stove to heat a swimming pool wood feed.

With the fittings exiting out the same end you would need to pump the water around it.


Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.